This is another card using the same digi image. This time it is larger and reversed. That is the great thing about digi images, you can have them any size you want and reverse the direction!
For this card I used the D'vine Swirls Cuttlebug folder on the debossed side for the white panel. After printing and coloring the Poinsettia I used a Nestablilities oval die, laid it over the image and traced around the inside of the die between the petals. I then used the same die to cut a black panel. I then found that I didn't have red or green ribbon that came anywhere close to matching the colors I had used! Looking through what I had I decided that this black ribbon with polka dots was the best I could come up with. To tie the ribbon in with the rest of the card I used a Micron pen the make polka dots around the oval. To make a black panel behind the the Nestie tag I taped the die to the paper and used a craft knife to cut around the outside of the die. to cut the holes I laid the white panel over the black panel and traced around the holes and then just cut rectangles around the mark.